manualshive.com logo in svg

Safelab AIRONE 1000R, Инструкция по эксплуатации

Поделиться
Скачать
Safelab AIRONE 1000R Скачать руководство пользователя страница 11

Doc no: M18       Issue no: 07       Created: 24/08/2009 

11

 

 

OPERATING INSTRUCTIONS. 
 

- 

Check voltage on data plate. 

 

-

 

Insert mains plug into power supply socket. 

 

- 

Check filters fitted before operating. 

 

- 

Turn the mains switch to the ‘ON’ position. Press “fan on” button on PCB. The fan 

motor(s) will run. 

 

- 

The AIRONE Filtration Fume Cupboard should be run for a test period of one hour with 
the sash in the lowest position. 

 

- 

Do not use physically or chemically incompatible substances within the working area or 
fume enclosure. 

 

- 

Follow the filter instructions and recommendations as detailed in the Operational 
Safety Log Book. 

 
- 

If the correct filters are not available - do not operate the AIRONE Filtration Fume 

Cupboard in the recirculatory mode. 

 
- 

The remaining filter efficiency should be regularly checked as detailed in the 

Operational Safety Log Book. Filters should be replaced before the maximum 

breakthrough value in the Filter Test procedure is reached. 

 

- 

Spare filters should be kept in stock to ensure that filters can be replaced in good time 
during regular monitoring or for emergency installations - should a spillage of volatile 

materials occur. 

 
- 

Regular and careful cleaning of the work surface, back baffle and support channels is 

recommended to prevent a build up of contaminant substances. 

 
Following these instructions will ensure protection for the operator, environment, and also 

prolong the life of the filters. 
 

It is the responsibility of the operator to ensure correct use of the AIRONE Filtration Fume 

Cupboard at all times.

 

 

 

 

Содержание AIRONE 1000R
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды