SafeCom Nuance Mx, Справочное руководство

Страница: 25 / 30

3 AppBlaster
D60829-07 25
3.7 Loading firmware images
3.7.1 Loading non-keyboard emulation firmware
1. Start AppBlaster .
2. Click on the tab Program Apps & Firmware Images .
3. Click Select Image .
4. In the Firmware folder select the file:
TWN4_Sx149_SF100_Report_Safecom_Standard.bix
5. Click Open .
6. Make sure the reader is connected to the computer.
7. Click Program Image .
After completed programming the reader will beep and is ready for card
testing using
SafeCom Administrator (2.5.2).
Note: The first time this step is performed on the computer, it may fail
because the USB driver installation is not completed. Wait for the USB
driver installation to complete and try again. If it continues to fail see
(3.8).
3.7.2 Loading keyboard emulation firmware
1. Start AppBlaster .
2. Click on the tab Program Apps & Firmware Images .
3. Click Select Image .
4. In the Firmware folder select the file:
TWN4_Kx149_SF100_Keyboard_Safecom_Standard.bix
5. Click Open .
6. Make sure the reader is connected to the computer.
7. Click Program Image .
After completed programming the reader will beep and is ready for card
testing using
Notepad (2.5.3).
Note: The first time this step is performed on the computer, it may fail
because the USB driver installation is not completed. Wait for the USB
driver installation to complete and try again. If it continues to fail see
(3.8).