SafeCom Nuance Mx, Справочное руководство

Страница: 22 / 30

3 AppBlaster
D60829-07 22
1. Start AppBlaster .
2. On the Handle Project tab select Project Template

Firmware Safecom V1.49. App Safecom Standard V1.00
Non-keyboard emulation (Used for Canon, HP, Lexmark, Ricoh,
Samsung, Controller and ID Controller).

Firmware Keyboard V1.49. App Safecom Standard V1.00
Keyboard emulation (Used for Kyocera, Sharp, Xerox, Controller and
ID Controller).
Note: Consult Table 5 in section (2.4) for specific information
about which devices uses what emulation. HP Sx, DS uses keyboard
emulation.
3. Click Start New Project .
4. The Interactive Configuration tab opens and with the controls to
configure the reader. All tags (protocols) are disabled by default.
5.
Check the tags (for example Indala) in the Search for Tags . Do NOT make
additional configuration changes like output bits and formats until you
have read about advanced configuration (3.6).
6. Click Blast! to transfer the configuration to the connected reader.
If you need to configure multiple readers it is recommended to first save the
project (3.5.1) and also create a production image (3.5.2).