manualshive.com logo in svg

Safe Fleet FRC inView 360 Fusion, Руководство по калибровке

Поделиться
Скачать
Safe Fleet FRC inView 360 Fusion Скачать руководство пользователя страница 17

© Safe Fleet | May 2018 | All rights reserved | Part #: 700-1111 R2

inView 360 Fusion Calibration Guide

p. 17

Setting the System for Calibration

The view mode you calibrate in depends on how you wish to position the AVM monitor in the vehicle. The following 

images will help illustrate the effects of view mode:

If you are going to mount the monitor in a landscape position, then you’ll need to calibrate your cameras in 

NT

 (normal 

top) mode. If you wish to use a portrait position, then you’ll need to calibrate for in 

ST

 (separate top) mode.  

Note that a third option - 

ST(FFT)

 (Side Top Full Front Top) works in conjunction with 

ST

 mode. FFT gives you a full screen 

view of the 360° image. This option is 

only

 available if you choose to calibrate the cameras in 

ST

 mode. The FFT image 

will not work if you calibrate in NT mode. 

When you launch the calibration tool, the view mode will be set to NT, which is the default. To switch view modes, click the 

drop-down menu and select the mode you want to calibrate for.

NT Mode

ST Mode

ST (FFT) Mode

Содержание FRC inView 360 Fusion




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды