© Safe Fleet | May 2018 | All rights reserved | Part #: 700-1111 R2
inView 360 Fusion Calibration Guide
p. 10
Placing Calibration Pads
6. Repeat the same procedure for the rear of the vehicle. Here’s what the vehicle would look like from above, when
calibration pads are place properly.
About Horizontal and Vertical Values
Since different vehicles have varying heights and widths, the values may not work for your vehicle shape. In order to
properly calibrate the AVM system, you will need to calibrate using the initial recommended values, then re-adjust the pads
or cameras, and repeat calibration until you have the desired image.
Ultimately, the calibrated image should be clear, distortion free, and you should see the calibration pads clearly on the in-
cab monitor. Take a look at the following images side by side:
Image A
has some distortion on the calibration pads in the rear of the vehicle. You can see that there is a “ghosting”
effect. Image A would need to be
re-calibrated
.
In
image B
, you see that the image has no distortion and the pads can be made out clearly in the image.
B
A
