9
1. Motor cord connection
4. Irrigation tube connection
Insert the power cord into the power
socket in the back of the control box.
2. Foot controller connection
connector lock.
- When it is not in use for long term, open the irrigation pump cover. Irrigation tube might change its shape and
cause a malfunction.
Insert the motor connector.
Check if the holes and pins of motor
connector are lined-up. Then screw
in the connector lock.
Open the pump roller cover.
Close the pump roller cover.
Make sure the irrigation tube is
located correctly
when close the pump roller cover.
Make sure the pump roller cover
is correctly close.
Insert the irrigation tube correctly.
Locate the Irrigation tube correctly when
insert the irrigation tube. Otherwise,
Irrigation cannot be smoothly
Insert the foot controller connector.
Check if the holes and pins of foot
controller connector are lined-up.
Then screw the connector lock.
3. Power cord connection
connector lock.
Saline
connection
part
Handpiece
connection part
A
B
C
B-1
D
C-1
