manualshive.com logo in svg

SAES SIP POWER, Руководство пользователя

Поделиться
Скачать
SAES SIP POWER Скачать руководство пользователя страница 58

 

 

 

USER MANUAL - SIP POWER ION PUMP CONTROLLER 

M.HIST.0109.23 

Rev.1 

        Page 

58 

of 

62 

 

16. WARRANTY 

CONDITIONS 

SAES guarantees that the Products delivered shall be free from operational and material defects 
and shall comply with the construction and functional data and specifications indicated in the 
Contractual Documents. 
This warranty shall have a term of TWELVE (12) MONTHS. For Products which require installation 
at BUYER’s facility by SAES personnel, the warranty shall have a term of TWELVE (12) MONTHS 
from the date of installation or FOURTEEN (14) MONTHS from the date of delivery, whichever 
term is shorter. Subject to the remainder of this Article 14, any action by BUYER for any alleged 
breach of this warranty shall be brought in writing by BUYER within thirty (30) days of BUYER’s 
discovery of the breach. This warranty shall only apply to the BUYER and may not be assigned. 
During the term of the warranty set forth above, SAES will promptly repair the Products which for 
their features can be repaired and which do not conform to the specifications and which BUYER 
returns to SAES at the address provided. Unless otherwise agreed and specified, BUYER shall be 
responsible for all transportation charges incurred in returning Products to SAES for repair; BUYER 
shall have obtained a Returned Material Authorization (“RMA”) number and specific shipping 
instructions from SAES prior to its shipping of the Products to SAES. SAES shall not unreasonably 
deny BUYER authorization to ship Products to SAES. SAES shall return repaired Products to 
BUYER, with transportation charges prepaid by SAES, unless otherwise agreed. Additional 
information is available on the General conditions of sales.  
 
 
 

 

Содержание SIP POWER































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды