ENGLISH
• 12 •
• Gently turn the scraper to remove any coffee residues
from the gasket;
• Finally remove the scraper and clean with a wet cloth to
eliminate any coffee traces.
10 DESCALING CYCLE
The formation of limescale inside the appliance is inevi-
table. It is necessary to descale the machine every 3-4
months of use and/or when you notice a reduction in the
water capacity of the appliance.
If you want to descale the machine yourself,
you can use a non-toxic and/or non-harmful
descaling product for coffee machines (commercially
available). We recommend using Saeco descaling
solution.
Caution! Do not use vinegar as a descaler.
•
(Fig.2)
- Remove and empty the water tank.
•
(Fig.3)
0L[WKHGHVFDOLQJVROXWLRQZLWKZDWHUDVVSHFL¿HG
RQWKHSDFNRIWKHGHVFDOLQJSURGXFWDQG¿OOWKHZDWHUWDQN
insert the tank into the machine.
•
(Fig.7)
- Turn on the machine by pressing the ON/OFF
button (18).
•
(Fig.8)
- Place a container below the steam spout.
• Open the knob (5) to remove, at intervals and one cup at
a time, the whole descaling product. Close the knob (5)
to stop the dispensing.
•
(Fig.7)
- During each interval allow the descaling solution
to take effect for about 10-15 minutes, disconnecting the
ON/OFF button (18). Empty the container.
•
(Fig.2-3)
- When the descaling solution is finished,
UHPRYHWKHZDWHUWDQNULQVHLWDQG¿OOLWZLWKIUHVKGULQNLQJ
water.
•
(Fig.4; Fig.8)
- Reinsert the tank in the machine. Open
the knob (5) to empty 2/3 of the water. Close the steam
knob (5) clockwise to stop dispensing.
• Let the machine warm up and empty the water tank as
described above.
If you are using a product other than the
recommended one it is important to always
follow the manufacturer’s instructions shown on the
pack of the descaling product.
11 DISPOSAL
• Put unused appliances out of service.
• Disconnect the plug from the socket and cut the electrical
cord .
• At the end of its life, take the appliance to a suitable waste
collection site.
