• 17 •
English
14 Brew one coffee. Press and release
the “
” button. The machine starts
brewing coff ee.
15 Wait until brewing is complete and
remove the container.
16 Then repeat operations from step 7 to
step 11 until the second water tank is
empty.
The descaling cycle is complete. Then,
the products can be brewed.
Hold
the
“
“ button pressed for
6 seconds to reset the machine and
cancel the descaling alarm signal.
Reassemble the external part of the Pan-
narello.
If the machine is switched off
during the descaling cycle,
next time the machine is switched
on the cycle must be repeated from
the beginning.
The descaling solution must
be disposed of according
to the manufacturer’s instructions
and/or regulations in force in the
country of use.
After completing the des-
caling cycle, wash the brew
group as described in the “Brew
Group” section in the “Cleaning and
Maintenance” section.
Steady on
Remarks on Descaling
The previous section explains the correct
operations to perform to descale the
machine.
The machine you have purchased is
equipped with advanced software to
check the quantity of used water in order
to provide reliable information about the
right time to carry out descaling opera-
tions.
This software has been programmed for
standard water hardness.
In case of especially hard water (high
calcium content), descaling cycles might
have to be carried out more frequently,
even if the machine does not display
warning signals.
Even if the machine is not used often
(e.g. 1 coff ee per day), it is recommended
to perform descaling cycles more fre-
quently.
In these specific cases, it is recommended
to perform descaling cycles every 1-2
months, even if the machine does not
signal it.
