Saeco Aulika SUP040R, Руководство по обслуживанию

Страница: 47 / 56

AULIKA 07 DISASSEMBLY
Rev. 00 / July 2012 Page / 09
06
7.13. Solenoid valves assembly
Loosen the screws shown in the picture and remove the card support for easier access
to the solenoid valves assembly
Loosen the screws under
the front cover of the chas-
sis as shown in the picture
Slide out the power and
hydraulic connections
Loosen the screws
To remove the discharge valve (A), lo-
osen the screws that fasten the cover
of the boiler pin and remove the valve.
Disconnect the po-
wer and hydraulic
connections
Loosen the screws shown in the picture to remove the
base and access the screw located under the chassis of
the machine
Remove the front cover of the chassis
as follows:
- loosen the screw shown in the picture (A)
- Move the cover towards the left to
unlock the stops (B)
- lift the bottom part of the cover to
remove the stop (C)
- pull outwards
7.12. Discharge valve
Loosen the screw
located under
the machine and
shown in the
picture
A
A
B
C