3.5.3 Finally, put the battery barrier in place, between every two batteries need one barrier.
3.6 Terminal Block and the positive and negative cable installation:
3.6.1 Firstly need to install the terminal fixing plate to the battery pack's positive and negative leads to location,
installation firm and correct.
3.6.2. Then install the black insulating base to the fixed plate, need the 5 # Ball hexagonal wrench through copper
wiring rotating seat to fix the reserved bolts when installing.
3.6.3 After connected the positive and negative cable, and then put the protection cover at the location.
Unloading
valve tool
手
Safety valve
The method of
take-off
safety
valve
Rubber
cap
The height of safety
valve is the same
with the external
The standard of tightness
Barriers