CHS100.86.011 Rev.02 Date 23/07/2018
2
Written by
Masrè
Roberto/11/112
Date of issue
23/07/2018
Checked by
Gualandi Fabrizio
Revision
02
Denomination
Number of pages
34
Operator interface
and PLC-based control system operating
instructions
Service code
CCE12V
Code
CHS100.86.011
GENERAL INFORMATION
INTRODUCTION
Carefully read the entire Instructions Manual before working on the machine and/or the packaging
of the various parts.
The Instructions Manual contains important information for safeguarding all personnel who work on
the machine as well as the machine itself.
The company using the machine must always assure all operators have completely read and
become familiar with the operating instructions.
Notwithstanding the machine is equipped with active and passive safety devices, all risks resulting
from incorrect use cannot be avoided.
SACMI shall not be held responsible for failure to heed safety precautions and accident prevention
rules and standards specified throughout this manual and property damage and personal injury
caused by unintended, inappropriate and erroneous use of the machine.
Any changes to the machine must be duly authorized by SACMI in advance.
All operations on the machine (maintenance, adjustments, repairs, cleaning) must be performed by
suitably trained personnel and according to the instructions of this manual.
SACMI reserves the right to make any technical modifications to this manual and to the machine
without giving prior notice.
Any request for more copies of this manual must be addressed to the customer service of SACMI.
All rights reserved; copy is forbidden.
This publication or parts thereof may not be reproduced, stored, transmitted, transcribed, or
translated into any language, either common or computerized, in any form or by any means without
the express written permission by SACMI.
SACMI reserves its rights on drawings and technical documentation according to the law.
SACMI ensures the contents of this publication. It is absolutely prohibited to use this publication for
other purposes, whatever they may be, that are extraneous to operation of the machine for which
this publication has been written.
The information contained herein is guaranteed as being correct only if the user carefully follows all
the guidelines and instructions provided in this publication
