CHS100.86.011 Rev.02 Date 23/07/2018
5
GENERAL REGULATIONS
WARNING!
Before performing any operation on the machine, all personnel who are to operate on it shall:
−
make sure the machine cannot be accidentally started up by shutting off all the power
supplies (electrical power, air supply, etc..) with personal locks (for example pad locks)
stamped with the name of the worker who put it on;
−
remove and personally store the keys of the locking devices
WARNING!
The electrical cabinets, like the junction boxes on-board the machine contain parts that may be
live. Access as set forth by standard EN 60204-1 is only allowed with a specific tool. Only skilled
personnel trained to access live components shall possess said tool. When the electrical panel is
live, the skilled personnel may only restore the electrical circuit protections.
WARNING!
Wherever “socket-plug” connections are present, either in electrical panels or shunting boxes fitted
on board the machine, it is obligatory to perform any disconnections only with the machine stopped
and after isolating the electrical system from the mains.
WARNING!
Some safety devices may have to be temporarily removed or made inoperative to carry out certain
maintenance operations and/or to adjust parts. Always put these devices back into place after
maintenance and/or adjustments have been completed before attempting to start the machine.
WARNING!
In order to assure the machine’s efficiency and its correct and safe operation it is essential to
comply with SACMI’s instructions and perform maintenance of the machine according to the
planned schedule and methods. In particular, it is recommended to periodically check correct
operation of all safety devices, insulation of electrical cables (which must be replaced if damaged)
and the efficiency of the earthing connection.
