28
3
1
2
NOTES ON MAINTENANCE
Recommended minimum profi le depth:
2.0 mm
Observe the wear marks (3).
Checking the tyre pressure
WARNING
Adjust the tyre pressure according to
the total weight load. Never exceed the
rated total weight or the bearing capacity
of the tyres.
Incorrect tyre pressure will have a con-
siderable effect on the riding prop er ties
of the scooter and the lifespan of the
tyres.
Tyre profi le
- While the tyres are cold:
- Twist off the valve caps.
- Check/adjust the tyre pressure.
- Twist on the valve caps.
Tyre pressure
Front
2.0 bar
Rear 2.25
bar
Tyre size
The standard scooter is provided with the
following tyre sizes:
Front 120/70-12
56J
Rear 130/70-12
56J
All Tyres are tubeless.
WARNING
Use only tyres approved by the man u -
fac tur er. The use of non-approved tyre
brands, types or sizes leads to the op-
erating permit of the vehicle be com ing
null and void. Use only pairs of tyres
pro duced by the same man u fac tur er.
Checking the tyre profi les
WARNING
Observe the minimum profi le depth pre-
scribed by law.
Never ride without valve caps (1). Firmly
tightened valve caps prevent the tyre
from sud den ly losing pres sure.
- Measure the profi le depth at the cen tre
(2) of the tyre’s tread.
