background image

13

1

2

3

Side stand and parking stand

Propping up the scooter on the side 
stand.

  WARNING

Always make sure that the stand is 
resting on firm ground. On sloping 
roads, always park the scooter facing 
uphill.
It is essential that the side stand is 
folded up before starting off! -Risk of 
accidents ! 

 

Side stand

 

  NOTE

The scooter is equipped with a side stand 
switch. If the side stand is folded up the 
engine is shoot off and will not start.

-

  Switch off the engine.

-

  Put your left hand on the left-hand 

handlebar grip.

-

  Hold with your right hand the holder grip 

(3).

-

  Fold out the arm of the side stand (1) as 

far forward as it will go and stop by foot.

-

  Slowly tilt the scooter to the left until its 

weight is supported.

Parking stand

-

  Switch off the engine.

-

  Put your left hand on the left-hand 

handlebar grip.

-

  Hold with your right hand the holder grip 

(3).

-

  Push the parking stand (2) down until the 

two skids are on the ground.

-

  Put you full body weight on the operating 

mandrel of the main standard.

-

  Pull the scooter towards the rear and 

simultaneously upwards onto the parking 
stand.

-

  Check that the scooter is standing 

fi rmly.

OVERVIEW AND OPERATION

Содержание Speedforce 50

























































Отзывы: