16
MAX
.
MIN
.
1
SAFETY TEST
Checking the oil level
CAUTION
Checking the oil while the engine is cold
will lead to a wrong measurement and
therefore the wrong oil quantity. In order
to avoid engine damage, never exceed
the maximum oil level nor let it drop
below the minimum level.
- Stop the warmed-up engine, wait for ap-
prox. 5 minutes and hold the motorcycle
upright.
NOTE
Make sure that the motorcycle during oil-
level checks stands level in all respects.
Even the slightest inclination towards the
side will produce measurement errors.
- Stop the engine and remove the oil filler
cap (1) on the lower right of the crank-
case.
- Clean the oil filler cap at the MIN-MAX
aera with a clean rag.
CAUTION
For checking the oil level only insert the
oil filler cap and don't screw in!
Otherwise there will be a wrong mea-
surement in order to avoid engine
damage.
- The oil level must be between the mini-
mum and maximum marks.
If required, replenish the engine oil SAE
15W/40 via the oil-filler opening of the oil
filler cap.
- Tighten the oil filler cap by hand.
