49
6
6
6
7
5
2
4
3
1
8
9
Cleaning the air filter
-
Clean the foam with Motorrex air clean-
er.
-
Afterward soak and wring out the foam
with air filter oil.
CAUTION
Check for properly installation of the
foam housing (9) and the manifold pipes
(5) in the filter case.
Otherwise the engine runs poorly or lead
to serious engine damage.
Usually the installation takes place in reverse
order to disassembly.
Remove the air filter
-
Loosen the clamp (1) and take off the
hose.
-
Unscrew the screw (2).
-
Pull out the filter case (3) from the guide
(4) on both sides.
-
Take off the manifold pipes (5) from the
filter case on both sides.
Opening the air filter
-
Remove the screws (6) and take off the
cover (7).
-
Remove the screw (8) and take out the
foam housing (9).
NOTE
The motorbike is attached with a oil foam
air filter. In case of heavy dirtiness the foam
(9) has to be replaced.
Clean for the first time
after
1.000 km
Clean every
4.000 km
Replace every
8.000 km
NOTES ON MAINTENANCE
