Sabo 36-EL, Руководство оператора

Страница: 58 / 98

10
GB
Attaching the connecting cable to the strain relief fitting (Illustration D2 )
ATTENTION
The unit may not be used without the cable relief in order to prevent damages to the switch/plug combination and to
the cable. The cable must be hung in the cable relief on the unit to ensure that it is fixed safely. This prevents the
cable socket from being pulled off the unit. Moreover, the cable aligns itself automatically on the other side when
cornering.
– Form a semi-circular loop in the cable, keep a distance of approx. 80 cm from the connection cable coupling.
– Insert the cable from the bottom into the cable relief and loop it around the fastening post.
– Hold the cable by both ends and pull it firmly into the cable relief.
Starting the motor (Illustration A2 )
Only start the engine when standing behind of the mower.
Place the mower on a level surface where the grass is not too high (high grass inhibits the start of the cutter bar and makes
starting more difficult). Where this is not possible, position the mower in such a way that the cutter is facing diagonally away
from the user, although only as far as absolutely necessary.
– To switch on the motor, first press and hold the red button.
– With the other hand, pull the safety grip on the upper handlebar section. The grip must be held in this position during
operation.
– The red button can then be released.
IMPORTANT
If the motor does not start 5 seconds after the unit is started, then
1. Let go of the switch holder
2. Pull the plug!
3. Check the power cable
4. Check the power supply at the building (fuse)
5. Check the unit for blockages in the mowing chamber
6 Get it checked by an authorised specialist workshop.
10 SWITCHING OFF THE MOTOR (Illustration F )
To switch off the motor, release the safety grip. The motor will be switched off and the automatic blade brake stops the blade
within 3 seconds.
11 EMERGENCY STOPPING
ATTENTION
Avoid injury! Motor and blade must stop within 3 seconds. If not, please contact the nearest authorized dealer.
Release the safety grip.
– The blade will stop.
– The motor will stop.
12 GRASS COLLECTOR
Safety instruction!
See table for explanation of symbols page 3
Operation with grass collector
While mowing, ensure that the collector is emptied in good time. The turbo signal on the collector will indicate when the
collector should be emptied.
IMPORTANT
Make sure that the chute (1) S1 is not bent when handling the collector.