M850/M860 USER MANUAL
CHARGING
24
©2020 Sabik Marine
Changing the Battery (Self-
Contained Only)
Battery replacement kits can be ordered directly
from Sabik Marine or from your authorized
distributor.
Multiple battery sizes are available. Consult the table
below to match your 800 series lantern with an
appropriate battery pack.
Pack Type
Part No.
Suitable for:
60X
69954
M850
OL800 Compact
96E
69955
M850/M860,
OL800 Standard
200BC
69956
M860
OL800 Large
Required tools:
Replacement Sabik Marine battery pack and
parts bag
¼
” hex driver handle (required)
Ratchet with driver adapter (required)
½” socket (required)
Remove all jewelry including rings
and bracelets prior to working on the
battery. Bridging battery terminals
with any metal could cause high
electrical currents and severe burns.
1. Turn the lantern off (refer to page 12 of this
manual for details).
2. Turn the lantern on its side. Use the ratchet
and driver to remove the four base plate
screws.
3. Hold the lantern by the base and head and
carefully return it to an upright position.
4. With the lantern in an upright position, slowly
lift the housing away from the base plate.
The base plate and housing
alignment.
5. Disconnect the battery harness and place
the housing to one side.
6.
Using the ½” socket, remove the center bolt
and washer.
