800 series USER MANUAL
PROGRAMMING
15
©2020 Sabik Marine
Setting the Calendar Function
The Calendar Function allows you to specify a dated
shutdown if desired.
GPS-enabled lanterns will be
synched to Coordinated Universal
Time (UTC). For units without
GPS, check the LED Display for
the current date and time and, if
required, update the date setting
prior to programming the calendar
function.
To toggle the Calendar setting on or off:
1. If you have not already done so,
establish a connection to the lantern.
2. The lantern LEDs will flash to confirm
the lantern is ready to receive
commands.
3. Navigate to the CAL menu.
4. Unlock the existing setting
5.
Toggle between “on” and “off
6. Lock the new setting
7. The lantern LEDs will flash to confirm
that the new setting has been locked.
To set the date that the lantern will enter
dated shutdown:
Confirm that the Calendar is turned “on”.
1. Navigate to the Con menu
2. Scroll to the Month value (
ΠΠon)
3. Unlock the existing setting
4. Use the number keys to enter the
month when dated shutdown will
begin.
5. Lock the new setting
6. Scroll to the day value (dAY)
7. Use the number keys to enter the
specific day of the month when
dated shutdown will begin.
8. Lock the new setting
9. The lantern LEDs will flash to
confirm that the new setting has
been locked.
To set the date the lantern will reactivate:
Confirm that the Calendar is turned “on”.
1. Navigate to the CoFF menu
2. Scroll to the Month value (
ΠΠon)
3. Unlock the existing setting
4. Use the number keys to enter the
month when dated shutdown will
end.
5. Lock the new setting
6. Scroll to the day value (dAY)
7. Use the number keys to enter the
specific day of the month when
dated shutdown will end.
8. Lock the new setting
9. The lantern LEDs will flash to
confirm your change.
