T-EP wall control
48
1. Turn on the appliance at the ON/OFF key
on the display.
2. Press the ON/OFF and “M” Menu keys at
the same time.
3. The symbol
flashes on the display.
Press
Enter
to confirm
.
Use the
TOUCH PAD
to select the symbol
“V”
and confirm
.
Use the
TOUCH PAD
to select fan
V1
or
V2
and confirm
.
COMMISSIONING
Set
fan V1 (this is the default intake air fan)
:
a) Using the
TOUCH PAD,
set the required
control voltage according to the detected
operation field on the operating diagrams.
valore tensione
del ventilatore
+
-
VV
b) Confirm using the
Enter
.
Now set fan
V2
following the same procedure
above.
valore tensione
del ventilatore
+
-
VV
ATTENTION!: once the confirmation is sent, the
controller waits just a few moments that the fan
speed reaches the necessary value before the
V2 calibration or the exit from the calibration
flow rate menu.
