T-EP wall control
46
T-EP TOUCH CONTROLLER
Introduction
This device was designed for the control of
controlled mechanical ventilation units.
It is suitable for “
ENERGY PLUS
” units.
The Main Screen on the control panel permits
access to two settings sub-menus:
1. USER Settings Menu where the user can select the
operating mode and set the clock;
2. TECHNICAL Settings Menu where the installer can
calibrate the flow rate, change the standard unit opera
-
ting parameters and monitor the operating state.
On the main screen, the user can view alarm reports and
main readings of the temperature and humidity.
The User Settings Menu offers these options:
1. Customised selection of desired air flow rate in
manual mode:
a) 100% - Nominal ventilation (standard)
b) 70% - Reduced ventilation (nighttime)
c) 45% - Humidity Control for High Humidity Rate
Environments
d) 25% -
Humidity Control for
Low Humidity Rate Environments
2. Automatic Mode, available for units
equipped with air quality sensor (CO2).
3. Weekly Programming.
The Technical Menu offers these options:
1.
Option of confirming or editing the operating parameters.
2. Monitoring the operating sizes.
3. Setting the nominal calibration speed of the fans.
4. Input and Selection of the Weekly Program available
to the user.
4
The 4 Weekly Programs can be set by the installer and
another 4 weekly programs can be set up according to the
user’s specific requirements.
The User Settings menu allows the user to enable or disable
the Weekly Program configured by the installer.
The MAIN SCREEN features the following options:
1. The preheating icon indicates activation of Antifreeze
mode.
2. A timed warning icon blinks to suggest replacing
the filters.
3. A damper bypass icon indicates automatic activation
of free-cooling mode.
4. Weekly Program Display
4
.
5. The post-heating icon indicates activation of this
mode (WINTER mode icon).
6. The cooling icon indicates use of the dehumidifying
unit (SUMMER mode icon).
DAY
°C
Indoor Air
Temperature
