Step 4. Dishwasher installation steps
Please refer to the specified installation steps in the installation
drawings.
1. Affix the condensation strip under the work surface of cabinet.
Please ensure the condensation strip is flush with edge of work
surface. (Step 2)
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into position. (Step 4)
6. Level the dishwasher. The rear food can be adjusted from the
front of the dishwasher by turning the Philips screw in the
middle of the base of dishwasher use an Philips screw. To adjust
the front feet, use a flat screw driver and turn the front feet until
the dishwasher is level. (Step 5 to Step 6)
7. Install the furniture door to the outer door of the dishwasher.
(Step 7 to Step 10)
8. Adjust the tension of the door springs by using an Allen key
turning in a clockwise motion to tighten the left and right
door springs. Failure to do this could cause damage to your
dishwasher. (Step 11)
9. The dishwasher must be secured in place. There are two ways to
do this:
A. Normal work surface: Put the installation hook into the slot of
the side plane and secure it to the work surface with the wood
screws.
B. Marble or granite work top: Fix the side with Screw.
96
GB
