Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the
amount of salt consumed based on the hardness of the water
used. This is intended to optimise and customise the level of salt
consumption.
Please follow the steps below for adjustment in salt
consumption.
1. Switch on the appliance;
2. Press the « P « button for more than 5 seconds to start the water
softener set model within 60 seconds after the appliance was
switched on;
3. Press the « P « button to select the proper set according to
your local environment, the sets will change in the following
sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set-up model
WATER HARDNESS
Water softener level Salt consumption
(gram/cycle)
German °dH French °fH British
°Clarke
Mmol/l
0 - 5
0 - 9
0 - 6
0 - 0.94
H1
0
6 - 11
10 - 20
7 - 14
1.0 - 2.0
H2
9
12 - 17
21 - 30
15 - 21
2.1 - 3.0
H3
12
18 - 22
31 - 40
22 - 28
3.1 - 4.0
H4
20
23 - 34
41 - 60
29 - 42
4.1 - 6.0
H5
30
35 - 55
61 - 98
43 - 69
6.1 - 9.8
H6
60
1°dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
The manufactory setting: H3
Contact your local water board for information on the hardness of
your water supply.
Please check the section 3 «Loading The Salt Into The Softener» of
PART I: Generic Version, If your dishwasher lacks salt.
113
GB
