Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push
them back. It is commended to load the lower basket first, then
the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last
page «Product fiche». Make sure that the water supply is turned
on to full pressure.
4. Open the door, press the Power button, to switch on the
machine.
5. Choose a program, the response light will turn on. Then close the
door, the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a
short time otherwise, the detergent may have already been
released and the dishwasher may have already drained the wash
water. If this is the case, the dishwasher needs to be reset and
the detergent dispenser must be refilled. To reset the dishwasher,
follow the instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm
stop working, you can open the door completely.
124
GB
