Saab 9-5 2011 Скачать руководство пользователя

Страница: 77 / 259

Seats, restraints

Head Restraint Removal and

Reinstallation

The rear outboard head restraints can

be removed if they interfere with the

proper installation of the child re‐

straint.
To remove the head restraint:

1. Partially fold the seatback for‐

ward. Rear Seats

85 for addi‐

tional information.

2. To remove rear head restraint

press the catch on the right sleeve

and press the release on the left

sleeve with a steeple object. Pull

the headrest upwards.

3. Store the head restraint in the

trunk of the vehicle.

4. When the child restraint is re‐

moved, reinstall the head restraint

before the seating position is

used.

Warning

There is a greater chance that oc‐

cupants will suffer a neck/spinal

injury in a collision if the head re‐

straints are not properly installed

and adjusted. Do not drive until the

head restraints for all occupants

are installed and adjusted prop‐

erly.

To reinstall the head restraint:

1. Insert the head restraint posts into

the holes in the top of the seat‐

back. The notches (A) on the

posts must face the driver side of

the vehicle.

2. Push the head restraint all the way

down.

3. Pull up on the head restraint to be

sure that it locks.

Содержание 9-5 2011




































































































































































































































































Результаты поиска

Содержание 9-5 2011

Отзывы:

Похожие инструкции для 9-5 2011

Бренды по названию

Популярные бренды

Saab 9-5 2011, Руководство пользователя

Результаты поиска

Содержание 9-5 2011

Отзывы:

Похожие инструкции для 9-5 2011

Бренды по названию

Популярные бренды