Saab 9-5 2011 Скачать руководство пользователя

Страница: 75 / 259

Seats, restraints

■ Use anchors 1 and 2 when instal‐

ling a child restraint using LATCH in

seating position A.

■ Use anchors 3 and 5 when instal‐

ling a child restraint using LATCH in

seating position B.

■ Use anchors 4 and 6 when instal‐

ling a child restraint using LATCH in

seating position C.

Installing child restraints using

LATCH in seating positions B and

C at the same time is prohibited.
Make sure to attach the child restraint

at the proper anchor location.
This system is designed to make in‐

stallation of child restraints easier.

When using lower anchors, do not

use the vehicle's safety belts. Instead

use the vehicle's anchors and child

restraint attachments to secure the

restraints. Some restraints also use

another vehicle anchor to secure

a top tether.

1. Attach and tighten the lower at‐

tachments to the lower anchors. If

the child restraint does not have

lower attachments or the desired

seating position does not have

lower anchors, secure the child

restraint with the top tether and

the safety belts. Refer to the child

restraint manufacturer instruc‐

tions and the instructions in this

manual.
1.1. Find the lower anchors for the

desired seating position.
1.2. Put the child restraint on the

seat. If the head restraint inter‐

feres with the proper installation of

the child restraint, the head re‐

straint may be removed. See

"Head Restraint Removal and Re‐

installation" at the end of this sec‐

tion.
1.3. Attach and tighten the lower

attachments on the child restraint

to the lower anchors.

2. If the child restraint manufacturer

recommends that the top tether

be attached, attach and tighten

the top tether to the top tether an‐

chor, if equipped. Refer to the

child restraint instructions and the

following steps:

2.1. Find the top tether anchor.

Open the cover to expose the an‐

chor.
2.2. Route, attach, and tighten the

top tether according to the child

restraint instructions and the fol‐

lowing instructions:

If the position you are using does

not have a headrest or head re‐

straint, or the headrest or head re‐

straint has been removed, and

you are using a single tether,

route the tether over the seatback.

Содержание 9-5 2011




































































































































































































































































Результаты поиска

Содержание 9-5 2011

Отзывы:

Похожие инструкции для 9-5 2011

Бренды по названию

Популярные бренды

Saab 9-5 2011, Руководство пользователя

Результаты поиска

Содержание 9-5 2011

Отзывы:

Похожие инструкции для 9-5 2011

Бренды по названию

Популярные бренды