Vehicle care
197
3. Remove tail light assembly. Take
care that the cable duct remains in
position.
Detach wiring plug from tail light
housing.
4. Only turn signal light 1 can be
changed, all other lights are non
exchangeable LEDs.
Rotate bulb holder anti-clockwise
to disengage. Withdraw the bulb
holder from the housing.
5. Push bulb into socket slightly, ro‐
tate anti-clockwise, remove and
renew bulb.
6. Insert bulb holder into the tail light
assembly, rotate clockwise to en‐
gage. Connect wiring plug.
7. Install tail light assembly in body.
Note that the assembly engages
in the body correctly. Tighten se‐
curing nuts. Close cover and en‐
gage.
8. Switch on ignition, operate and
check all lights.
Side Turn Signal Lamps
There are side turn signal lights in the
housing of the exterior mirrors. These
lights are non-exchangeable LEDs.
Consult a workshop in the case of
a defect.
Содержание 9-5 2011
