32 026 006 7
Saab 9-5
22
4D -
Fit the rubber grommet and plug in the con-
nector:
·
Fit the rubber grommet (A) on the parking
assistance system's wiring harness with the
funnel-shaped end directed in towards the
car. The grommet should be located 370 mm
from the end of the taping at the cable termi-
nals.
·
Secure the rubber grommet to the wiring har-
ness using a cable tie.
·
Remove the rubber plug below the left-hand
tail lamp.
·
Guide the wiring harness out through the hole
and fit the kit's rubber grommet.
·
Insert the cable terminals in the connector (B)
as follows:
1 Black (BK)
2 Brown (BN)
3 Yellow (YE)
4 Blue (BU)
5 Orange (OG)
6 Grey (GY)
Important
Check that the cable terminals lock firmly and that
the whole of the seal is in contact against the con-
nector.
Be careful so that the seals are not damaged.
E930A519
A
B
