10 32 026 006
Saab 9-5
31
4D -
Fit the control module and secure the wir-
ing harness:
·
Attach the ground cable to the grounding
point (A) in the luggage compartment below
the left-hand tail lamp.
·
Route the wiring harness along the left-hand
wheel housing.
·
Insert the screws in the control module holes,
connect the wiring harness to the control
module (B), and fit the control module with
connectors facing down onto the plate behind
the rear seat backrest. Tighten the screws.
·
Secure the wiring harness the whole way
using cable ties (C).
WARNING
Check that the wiring harness is not trapped.
Incorrect fitting could damage the wiring harness
and cause a short-circuit/fire.
Important
Secure the wiring harness so that there is no risk
of chafing and rattling.
E930A522
C
C
B
C
C
C
C
A
C
