S-WORKS Specialized Shiv TT, Инструкция по эксплуатации

Страница: 9 / 24

Page 7 of 20
1.2 INSTALLING THE BRAKE LEVERS IN THE HANDLEBAR
8. Engage the cable housings into the left and right brake levers (1-E). Depending on the brake lever choice, install a brake cable ferrule (1-F) if necessary.
9. Push the cable housing back through the handlebar with the levers, while pulling the housing out from the handlebar’s center hole. Make sure that
the cable housing is fully engaged in the lever body and the lever body is fully engaged in the handlebar.
10. Torque to 50 in-lbf (5.6 N*m).
1.3 INSTALLING THE HANDLEBAR ON THE STEM
11. Guide the front brake cable housing and ferrule into the stem base’s center hole and place the handlebar onto the stem base. Depending on the
chosen brake levers, the cable housing may need to be trimmed to fit, to make sure the cable housing has a smooth, natural path into the stem.
12. Install the front an rear brake cables into the brake levers and through the cable housings.
13. Thread the front brake cable through the stem cable hole (1-G).
1-E
1-F
1-G
3
4