S+S Regeltechnik Thermasreg RTR-S Series, Инструкции по эксплуатации, монтажу и установке

Страница: 10 / 32

10
G
THERMASREG ® RTR -S
Rev. 2015 - 1.0 GB
Electronic room temperature controllers, climate controllers
THERMASREG ® RTR-S
for monitoring
or controlling temperatures with output 0 - 10 V for heating and cooling, optional as continuous climate
controller with manual ventilator speed regulation, setpoint adjustment, and LED status indicators.
Application in dry individual rooms heated or cooled by radiators, cooling ceilings, or ventilation
or air conditioning systems, or as remote control unit for air conditioners, e.g. in hotels, offices,
or hospitals or as room thermostat.
TECHNICAL DATA:
Power supply: ..................... 24 V AC ⁄ DC ± 10 %
Temperature sensor: ............ internal or external
Pt 1000 according to DIN EN 60751, class B
Control range: ..................... +5....+30 °C, adjustable via setpoint potentiometer with numerical scale or
21 °C (± 8 K), adjustable via setpoint potentiometer with swelling arrow (central position ⁄ + ⁄ –)
Output: .............................. 1 x heating ...................................................... 1 x cooling
0 - 10 V or 10 - 0 V repluggable, 0 - 10 V or 10 - 0 V repluggable,
max. 5 mA max. 5 mA
Proportional band: ............... heating ........................................................... cooling
internally adjustable via potentiometer, internally adjustable via potentiometer,
+0.5...+3 K (1K factory setting) +0.5...+3 K (2 K factory setting)
Neutral zone: ...................... internally adjustable via potentiometer,
+1...+5 K (1K factory setting)
Control mode: ..................... PI
Enclosure: .......................... plastic, material ABS,
colour pure white (similar to RAL 9010)
Dimensions: ........................ 98 x 106 x 34 mm (Frija II, with potentiometer)
Installation: ........................ wall mounting or on in-wall flush box Ø 55 mm,
base with 4-hole for mounting on vertically or horizontally
installed in-wall flush boxes for cable entry from the back,
with predetermined breaking point for on-wall cable entry
from top ⁄ bottom in case of plain on-wall installation
Electrical connection: .......... 0.14 - 2.5 mm 2 via terminal screws on circuit board
Humidity: ........................... max. 90 % r. H., non-precipitating air
Protection class: ................. III (according to EN 60 730)
Protection type: .................. IP 30 (according to EN 60 529)
Standards: ......................... CE conformity,
electromagnetic compatibility according to EN 61 326,
EMC directive 2004 ⁄ 108 ⁄ EC