12
IMAGE 3
IMAGE 4
Image 3
shows the first layer of concrete weights installed.
Image 4
shows how to properly stack the last
two layers of concrete weights, using all 24 blocks. Close all gaps between the top layers, ensure they
are all touching and pressed firmly together before tightening the weight straps.
IMAGE 5
Tighten both straps as shown in Image 5 across the top of both rows of weights. Loop the strap through
its buckle and pull firmly securing each top row of weights.
CAUTION
: The restraining harnesses must be correctly installed. Failure to correctly attach the
restraining harness to frame may result in the weights shifting during use.
7. Place housing on frame. Ensure the housing fits square and flush to the frame. If necessary, re-adjust
the concrete blocks to address any interference with the housing cover.
8. Remove the two lock nuts and washers from mast mounting hub on base assembly (as shown below).
9. Position mast assembly through housing and attach to studs located on base assembly with lock nuts
and washers. Fully tighten with 3/4” or 19mm socket wrench.
