7. Start-up
Unpacking
Inspect all components for any visible damage immediately after un-
packing. In case of visible damage, notify S.M.S after sales support
immediately, since safe operation cannot be guaranteed. Keep all
packaging materials for later dispatch, since only the original packaging
ensures safe transport.
Scope of delivery
-
Control unit with TFT-Touch-Display and computer for use in
Zone 2 explosive area
-
Mains cable without plug
-
Operating manual
-
Setup instructions
Avoid the following ambient conditions for fast and accurate working
results:
-
Unstable, non-level surface
-
Drafts
-
Extreme humidity or chemical vapours
-
Extreme heat (e.g. next to heating or exposed to direct sunlight)
-
Mechanical impact
17
