- 1 -
Remote Control Racer
Remote Control
Lithium Battery Pack
USB
Charger
Operation Manual
1
、
PRODUCT CONFIGURATION
CAUTIONS
(1).Disassemble small parts should be put away,
don’t let the kid swallow it.
(2).If the operation site has other radio wave interference,
please choose another site to play.
(3).When the remote control power is low, stop the
operation immediately.
(4).Do not dispose of the removed packaging materials, to avoid environmental pollution.
(5).Store your remote control model in a dry and cool place.
(6). Do not store in a place where near fire and high
emperature / humidity.
(7).When the battery is wetted by water, please wipe off the
water thoroughly.
G172
G171
G174
G173
2
、
INSTALL REMOTE CONTROL BATTERY
(1).Push the cover in the direction indicated by the arrow, to open the battery cover (Fig. 1)
(2).As shown (Fig. 2), install 3*1.5V “AA” batteries with the correct polarity (battery sold separately)
(3).Close the battery cover, and push upward (Fig. 3).
1.When installing the battery, you must place the battery positive and negative terminals
with the battery box corresponding indicated terminals.
2.Do not mix old and new batteries.
3.Do not mix different types of batteries
ATTENTION
!
(Fig. 1)
(Fig. 2)
(Fig. 3)
1.5V
AA
1.5V
AA
1.5V
AA
PUSH
1.5V
AA
1.5V
AA
1.5V
AA
PUSH
1.5V
AA
1.5V
AA
1.5V
AA