RYTEC DG1200, Инструкция по установке и эксплуатации

Страница: 22 / 26

16
1. To enter into the programming mode press and
hold both the Open and Close Backup Time
buttons for three seconds. The display will change
to three 0's as shown in Figure 20. To continue
the programming mode, you will have to enter the
three digit security code. Contact the Rytec
Customer Support Department at (414) 677-9046
for the code.
000
A2500027
Figure 20
2. The first (left) digit will blink. Press the up or down
arrow key to raise or lower the value of the first
digit. After the first digit is set, press the Select
button to move to the next digit. Repeat the
process for all three digits of the security code,
then press the Set button to enter the Program
Mode.
3. Once you have entered the program mode the
display will show the various program menus.
(See Figure 21.) Press the Select button to scroll
through the programs.
PrOG - 1
A2500027
Figure 21
4. After you find the program you wish to change,
press the Set button to enter the sub-menu for
that particular program. Each sub-menu will be
identified by the program number and an option
code. Figure 22 shows the default setting (Door
Not Closed) for Program 1.
P1 = LSC
A2500027
Figure 22
5. For Programs 1 and 2 only one option can be
selected. Scroll through the options using the
Select button. Press the Set button to select the
option displayed. This will return you to the main
Program menu.
SETTING THE PROGRAM OPTIONS