Ryobi RHT2660DA, Руководство пользователя, Страница: 18 / 239

15
English
GB
F D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG
■
T h i s e n g i n e i s c e r t i f i e d t o o p e r a t e
o n u n l e a d e d p e t r o l i n t e n d e d f o r
a u t o m o t i v e u s e w i t h a n o c t a n e r a t i n g
of 87 ([R + M] / 2) or higher.
■
Do not use any type of pre-mixed petrol / lubricant
from fuel service stations, this includes the
pre-mixed petrol / lubricant intended for use in
mopeds, motorcycles, etc.
■
Use synthetic 2-stroke lubricant only. Do not
use automotive lubricant or 2-stroke outboard
lubricant.
■
Mix 2% synthetic 2-stroke lubricant into the petrol.
This is a 50:1 ratio.
■
Mix the fuel thoroughly and also each time before
fueling.
■
Mix in small quantities. Do not mix quantities
larger than usable in a 30 day period. Synthetic
2-stroke lubricant containing a fuel stabilizer is
recommended.
FILLING THE TANK
■
Position the hedge trimmer on its side with the
fuel cap pointing upward.
■
Clean surface around fuel cap to prevent
contamination.
■
Loosen fuel cap slowly to release pressure and to
keep fuel from escaping around the cap.
■
Clean and inspect the gasket.
■
Carefully pour fuel mixture into the tank. Avoid
spillage.
■
Immediately replace fuel cap and hand tighten.
Wipe up any fuel spillage. Move 9 m away from
refueling site before starting engine.
Note: It is normal for smoke to be emitted from a
new engine during and after first use.
WARNING
Always shut off engine before fueling. Never
add fuel to a machine with a running or hot
engine. Move at least 9 m from refueling site
before starting engine. Do not smoke!
1 Litre + 20 ml =
2 Litres + 40 ml =
3 Litres + 60 ml = 50:1 (2%)
4 Litres + 80 ml =
5 Litres + 100 ml =
15
STARTING AND STOPPING (Fig. 3)
WARNING
When the engine starts with the trigger
locked, the blades will move. Keep body,
objects, and obstructions away from blades.
Failure to keep away from the blades can
result in serious injury.
ROTATING HANDLE
(Fig. 4)
The handle can be rotated 45
o
or 90
o
to the left or to the
right.
To rotate handle:
■
Shut off the hedge trimmer.
■
Disengage the throttle trigger.
■
Pull back on the rotating handle knob.
■
Turn handle to the right or to the left.
■
Release rotating handle knob.
■
Keep turning handle until it locks into place in
one of the 45
o
or 90
o
positions.
NOTE: The trimmer will only operate at one of these locked
positions. The handle is locked when the rotating handle
knob is securely into place, is not extended, and the handle
will no longer move to either side.
OPERATING THE HEDGE TRIMMER (Fig. 5)
WARNING
Read the safety information for safe operation
using the blade. Extreme care must be taken
when using blades to ensure safe operation.
Refer to Specific Safety Rules.
WARNING
Always keep both hands on the hedge
trimmer handles. Never hold shrubs with one
hand and operate hedge trimmer with the
other. Failure to heed this warning can result
in serious injury.
WARNING
Clear the area to be cut before each use.
Remove all objects such as cords, lights,
wire, or loose string which can become
entangled in the cutting blade and create a
risk of serious personal injury.
RHT2660DA_25lgs manual.indd 15 RHT2660DA_25lgs manual.indd 15 12/20/03 12:00:11 PM 12/20/03 12:00:11 PM