background image

English

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

EL

TR

3

blade. Ensure the speed marked on the saw blade is at 
least equal to the speed marked on the saw.

 

Ŷ

Always use blades with correct size and shape of 
arbour holes. Blades that do not match the mounting 
hardware of the saw will run eccentrically, causing loss 
of control.

 

Ŷ

Do not use blades of larger or smaller diameter than 
recommended. Do not use any spacers to make the 
blade fit onto the spindle.

 

Ŷ

Check the tips of the saw blade for damage or abnormal 
appearance before each use. Tips that are damaged or 
loose can become flying objects in use and increase the 
chance of personal injury.

 

Ŷ

Do not use cracked or distorted saw blades. Do not use 
saw blades that are damaged or deformed

 

Ŷ

Scrap the saw blade if damaged, deformed, distorted or 
cracked, repairing is not permitted.

 

Ŷ

Do not use HSS blades

 

Ŷ

Ensure the saw blade is mounted correctly, tighten the 
arbor nut securely before use (tightening torque approx. 
12-15 Nm).

 

Ŷ

Fastening screw and nuts shall be tightened using the 
appropriate spanner, etc.

 

Ŷ

Extension of the spanner or tightening using hammer 
blows is not permitted.

 

Ŷ

Make sure the blade and flanges are clean and the 
recessed sides of the collar are against the blade.

 

Ŷ

Make sure the blade rotates in the correct direction.

 

Ŷ

Before work, make a dummy cut without the motor 
turned on so the position of the blade, operation of the 
guards with respect to other machine parts and work 
piece may be checked.

 

Ŷ

Never leave the machine unattended.

 

Ŷ

Do not apply lubricants on the blade when it is running.

 

Ŷ

Never perform any cleaning or maintenance work when 
the machine is still running and the head is not in the 
rest position.

 

Ŷ

Never attempt to stop a machine in motion rapidly 
by jamming a tool or other means against the blade, 
serious accidents can be caused unintentionally in this 
way.

 

Ŷ

Disconnect the saw from the mains supply before 
changing blades or carrying out maintenance.

 

Ŷ

Pay attention to blade packing and unpacking, it is easy 
to be injured by the sharp blade tips.

 

Ŷ

Use a blade holder or wear gloves when handling a saw 
blade.

 

Ŷ

Keep and store the blade in original packaging or other 
suitable packaging, keep in dry conditions and away 
from chemicals which may damage the blade.

LASER SAFETY RULES

 

Ŷ

The laser radiation used in this saw is Class 2 with 

PD[LPXP”P:DQGQPZDYHOHQJWKV'RQRWVWDUH

into the laser beam. Failure to comply with the rules 
could result in serious personal injury.

 

Ŷ

We have supplied you with an adhesive label in your 
language and now request that you please apply this 
over the top of the existing English language label 
that is located on the side of the tool prior to first 
commissioning the machine.

 

Ŷ

Do not stare into beam during operation.

 

Ŷ

Do not project the laser beam directly into the eyes of 
others. Serious eye injury could result.

 

Ŷ

Do not place the laser in a position that may cause 
anyone to stare into the laser beam intentionally or 
unintentionally.

 

Ŷ

Do not use optical tools to view the laser beam.

 

Ŷ

Do not operate the laser around children or allow 
children to operate the laser.

 

Ŷ

Do not attempt to repair the laser device by yourself.

 

Ŷ

Do not attempt to change any parts of the laser device 
by yourself.

 

Ŷ

Any repairs must only be carried out by the laser 
manufacturer or authorized service agent.

 

Ŷ

Do not replace the laser with a different type.

RESIDUAL RISKS

Even when the machine is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise in use and the 
operator should pay special attention to avoid the following:

 

Ŷ

Risk of contact with uncovered parts of the rotating saw 
blade.

 

Ŷ

Kick-back of work pieces and parts of work pieces due 
to improper adjustment or handling. 

 

Ŷ

Catapulting of faulty carbide tips from the saw blade.

 

Ŷ

Damage to respiratory system if effective dust mask is 
not worn.

 

Ŷ

Damage to hearing if effective hearing protection is not 
worn.

MAINTENANCE

 

Ŷ

Do not make any adjustments while the motor is in 
motion.

 

Ŷ

Always make sure the machines plug has been removed 
from the mains power source before changing brushes, 
lubricating or when doing any works or maintenance on 

Содержание EMS254L









































































































































































Отзывы: