Rydeen BSS-ONE, Руководство пользователя

Страница: 9 / 20

Installation
7
Do not perform installation in rain or fog.
NOTE:
1. Ensure that the connector is inserted correctly according to the corresponding
label and the arrow marks of the wire connector at the connection point. When
connecting, ensure that the KEY or raised area of the connector mates with the
opposite connector. Do not force any connection
and ensure that the connector
mates properly.
2. To avoid any damage to the connectors, align the arrows on each of the
corresponding items, then firmly press connectors together to ensure a good
connection. Failure to properly install and connect the system components may
cause damage to the product and operation of the system.
3. The radar sensor should be kept in a position with low interference, otherwise it
may cause the detection to be insensitive or not work properly.
4. The radar sensor should be kept clean. The adhesion of ice, snow or mud will
affect the normal operation of the sensor.
Installation Diagram
Secure the wiring with cable clamps or adhesive tape. Wrap adhesive
tape around wiring that comes into contact with metal parts to protect
the wiring.
●
●
Do not pull the connectors with excessive
force. Do not pull the harness with excessive
force.
Fasten all connectors and terminals
securely. Stress relieve harnesses and secure
properly.