Rydeen BSS-ONE, Руководство пользователя

Страница: 13 / 20

Function Introduction
11
Level Warning Way Detection Zone Target Conditions
Level I LED On (Constant)
*Vertical: 1.6-23 feet (0.5-7m)
from radar
*Horizontal: 5 feet-14.8 feet
(1m-4.50m)
Dynamic
vehicle
Overtaken: Vehicle
Speed: ≥ 13mph (20
km/h)
Overtake: Vehicle
Speed: ≥ 15mph (25
km/h)
Level II LED Flash & Buzzer On
*Vertical: 1.6-23 feet (0.5-7m)
from radar
*Horizontal: 5 feet-14.8 feet
(1m-4.50m)
Dynamic
vehicle
Overtaken: Vehicle
Speed: ≥ 13mph (20
km/h)
Overtake: Vehicle
Speed: ≥ 15mph (25
km/h)
Turn signal ON
Relative Velocity: > 0.6 ~ <13mph (>1 ~ 20km/h) (Overtaken)
Overtake: The target vehicle enters the BSD warning area >2s
LANE CHANGE ALERT (LCA)
When the vehicle speed exceeds 13mph (20km/h),
and TTC < 2s, the system starts detection. The
detection area is the left and right rear of the car.
When a vehicle is approaching from behind, the LED
on the side of the oncoming car will
light up to
warn the driver. When the turn signal is activated
and the driver prepares to change lanes, if there is
an oncoming car behind, the warning light on the
side of the oncoming car will continue to flash and give an audible warning. (Level II)
Level Warning Way Detection Zone Target Conditions
Level I LED On (Constant)
*Vertical: 1.6feet-98.4feet
(0.5m-30m) from radar
*Horizontal: 5 feet-14.8 feet
(1m-4.50m)
Dynamic
vehicle
Vehicle Speed: ≥
13mph (20 km/h)
TTC<2s
Level II LED Flash & Buzzer On
*Vertical: 1.6feet-98.4 feet
(0.5m-30m) from radar
*Horizontal: 5 feet-14.8 feet
(1m-4.50m)
Dynamic
vehicle
Vehicle Speed: ≥
13mph (20 km/h)
Turn signal ON TTC<2s
Relative Velocity: > 13~ <25mph (>20 ~ 40km/h)
NOTE:
Under certain driving scenarios, the BSS-ONE may detect objects in an unintended
way. The following conditions below are examples of scenarios where fault
notifications may occur.