Rydeen BSS-ONE, Руководство пользователя

Страница: 12 / 20

Installation
10
NOTE:
For customers utilizing BSS-MI or TOMBO 360 LED indicators instead of
provided LED indicators for A-pillars, please contact RYDEEN Technical
Support at tech1@rydeenmobile.com or call 310-787-7880, toll-free
877-777-8811 for installation instructions.
Step 6
Connect each unit according to the wiring diagram (page 5).
Red - Ignition/ACC controlled 12V+ source.
Black - Ground (-) Polarity (Connect to car chassis or ground point).
Step 7
Test the system’s operation, ensuring that all features operate according to this
manual. After operation is tested, finalize connections and secure wires.
5. Function Introduction
System Activation
1. Start vehicle.
2. Indicator lamps will illuminate for 3 seconds and beep to confirm activation and
run self-diagnostics.
3. The Blind Spot Detection System will activate when you start the engine and
engage while driving above speeds approximately 13mph (20km/h).
Blind Spot Indicator Lamps
1. The left indicator will illuminate when a vehicle is in your left blind spot while driving.
This indicator will flash and an audible tone will sound when your left turn signal is
activated while there is a vehicle in the left blind spot.
2. The right indicator will illuminate when a vehicle is in your right blind spot while
driving. This indicator will flash and an audible tone will sound when your right turn
signal is activated while there is a vehicle in the right blind spot.
The BSS-ONE is designed to aid in detecting vehicles that may have entered the
vehicle blind spot zone, which will provide you with a more safe and convenient
driving experience.
BLIND SPOT DETECTION (BSD)
When your vehicle speed exceeds 13mph (20km/h),
BSD starts detection, and the detection area is the left
and right rear of the car. When a vehicle is approaching,
the LED indicator on the side of the oncoming car will
light up to warn the driver.
If your vehicle, has it’s turn signal activated, and there
is an oncoming car approaching, it will enter level II
warning, LED flashing & buzzer warning sound to alert the driver.