Care and Cleaning
- 2 -
661851-001
Cleaning RVision Products
This appendix contains instructions for cleaning RVision products.
WARNING
Do not open system enclosures. All servicing of sealed system
components should be performed by RVision or the appropriate
component manufacturer. Opening system enclosures may lead to
invalidation of the product warranty.
CAUTION
Do not use a dry cloth to clean the camera window or germanium
lens. A dry cloth will scratch and damage the window and lens or
the coating on the window and lens.
Camera Window and Thermal Lens
•
If the lens or camera window must be cleaned, use 75% isopropyl alcohol and lens
tissue.
•
Clean the lens with light wiping motions.
•
Use a fresh section of tissue with each swipe across the lens so that once removed from
the lens, dirt is not dragged back over the surface of the lens.
Exterior Surfaces
WARNING
Do not use compressed air to clean the exterior surface as damage may
result to the window and lenses, and push sand or particulate matter into
the seals.
To remove dirt and smudges, a mi l d house-hold cleaner such as 409 may be used. For
removing fingerprints, use a soft cloth soaked in 75% Isopropyl alcohol. Do not use any
industrial-grade solvents as damage to the exterior paint, optics, or O-rings may result.
Only 75% IPA should be used on optical window or lens surfaces.
Содержание Thermal FFV
