Rutter VDR-100G2, Руководство по эксплуатации пользователя

Страница: 46 / 79

VDR-100G2/G2S Operation User Manual
36
RUT-UM-02-002_Rev. 2.0
ƒ
The minimum requirements for a PC outlined in
Section 4.1 - Optional Client Download PC
.
ƒ
Rutter Technologies’ playback software.
Important! Downloading a secure data set to the USB Memory Stick is done using the
same procedure as downloading to the RSM (described below). If a system has both an
RSM and USB Memory Stick connected at the same time, the download instructions below
will only download data to the USB Memory Stick. The RSM will continue in auto-archiving
mode only.
5.1 Copying Data to RSM/USB Memory Stick
To retrieve data using the OAU, it is necessary to ensure the USB Memory Stick/RSM is connected and
recognized by the G2 system. Complete the following steps:
1. If not already connected, insert the USB Memory Stick into the available USB port or attach the
Ethernet and power cable from the RSM to the DPU (or connect the USB Memory Stick to the
DMM).
2. Press the “RSM” button on the OAU menu pad.
3. At the main menu screen of the OAU, two (2) options are displayed:
‚
“Copy Data”
‚
“RSM Archiving”
Note! The RSM cannot be simultaneously connected via Ethernet to the VDR while
connected to the Client PC via a USB connection.
4. Ensure the “Copy Data” option is highlighted (blinking cursor is adjacent to the option.) Once
highlighted, press the “Enter” button on the OAU menu pad.
5. Three (3) options are now displayed:
‚
“Copy Current Data”: allows a user to retrieve a full 24-hour data set. See
Section 5.1.1 -
Copy Current Data
.
‚
“Copy Secured Data”: allows a user to retrieve specific segments that have been
previously secured and may range in length of time. See
Section 5.1.2 - Copying
Secured Data
.
‚
“Copy Extended NMEA”: allows a user to retrieve extended NMEA data. See
Section
5.1.3 - Copying Extended NMEA Data
.