Rutter VDR-100G2, Руководство по эксплуатации пользователя

Страница: 37 / 79

VDR-100G2/G2S Operation User Manual
27
RUT-UM-02-002_Rev. 2.0
4 DATA RETRIEVAL
The VDR-100G2 is supplied with several options for accessing and replaying data in order to reconstruct
voyages:
ƒ
The primary method of retrieving data is via the USB Memory Stick. The copying of data to
the USB Memory Stick is initiated at the OAU via the RSM button (see
Section 4.4 - Remote
Storage Module
).
ƒ
The Remote Storage Module (RSM). The download is initiated at the OAU (see
Section 4.4 -
Remote Storage Module
).
ƒ
An alternate method is to download data via a client PC connected to the VDR by a LAN
connection. All necessary software is optional and resident on the client PC (
see Section 4.2
- Installation of Download Software
).
4.1 Optional Client Download PC
If the customer should choose to make use of the optional download client PC, additional copies of the
playback software are supplied. The Download/Playback client PC should be a Pentium class or
equivalent, and IEC 60945 certified if installed on the Bridge. The computer system should, as a
minimum, include:
ƒ
Pentium III or higher processor
ƒ
256 MB of memory
ƒ
SVGA Video port and monitor (it is recommended that the monitor be 15” or larger and supports
a non-scrollable resolution of 1024x768 or greater)
ƒ
Audio hardware with PC speakers or headphones
ƒ
100 Base-TX Ethernet Interface
ƒ
USB 2.0 Port
ƒ
Serial data port (if external ECDIS display support is required)
ƒ
16X DVD-R/DVD-RW drive
ƒ
80 GB or larger internal Hard Disk Drive
ƒ
USB, AT or PS/2 mouse and keyboard
ƒ
Power Supply: Dual Input Voltage: 115V at 60 Hz; or 220V at 50 Hz
ƒ
English O/S Edition: Windows 2000 or Windows XP (recommended)