RUTHMANN SA18 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 16

RUTHMANN SA18 Скачать руководство пользователя страница 4

QUICK USE MANUAL 68090258

ORIGINALE

RUTHMANN ITALIA s.r.l. Via Santa Maria del Piano di Sotto, 91/B - 47854 Montescudo – Monte Colombo (RN) – ITALIA

pagina 4

The SA18/SA18HB is fitted with the

TRACK DOUBLE SPEED SYSTEM

: after 5 second that you are moving the

track in forward or backward direction, the system starts the double speed on the track, only if the machine
is on a plane floor. When the inclination of the floor changes (ex. on a ramp or on a slope) or the operator
turns the platform left or right direction, automatically the system reduces the speed.

NOTE: Operate at safety distance from the machine.

WIDTH ADJUST CRAWLER SYSTEM (OPTION)

The model SA18/SA18HB could be supplied with a CRAWLER WIDTH ADJUSTING SYSTEM as option. It is
possible to modify the width of the crawler moving from a minimum width of 0,78 m to a maximum width
of 1,1 m. Move leftward or rightward the specific switches in the same time for extending/reduce the track
width.

- EXTEND THE TRACK WIDTH:

- REDUCE THE TRACK WIDTH:

MACHINE STABILIZATION

The control of outriggers is proportional and the speed of movement could modulate by the pressure on
corresponding joystick. If two or more stabilizers are activated in the same time, the system operates with
the maximum speed.
Moving down the switch of the stabilizers (A, B, C, D) from the radio-control, the stabilizers go down lifting
the carriage from the field. When the stabilizers are on the ground, the corresponding pictographs appear
on display to indicate that they are operating correctly. If there is the image, the stabilizers are firmly on
the ground; if one of these pictographs is not on display, this indicates that the stabilizer is not positioned
correctly.

+

+

A B C D

«
...
2
3
4
5
6
...
»

Содержание SA18

















Отзывы:

Нет отзывов