background image

QUICK USE MANUAL                                                                                                                                                             68090258 

ORIGINALE 

RUTHMANN ITALIA s.r.l.  Via Santa Maria del Piano di Sotto, 91/B - 47854 Montescudo – Monte Colombo (RN) – ITALIA   

pagina 2 

1. STARTING

 

 

 

  

 

For starting the platform: 
- turn the red key (1)  to connect the battery 
- put the starting key (2) on “ON”. 

 

 

 

For activating the remote control: 
- check that the red emergency button is not pushed 
- Turn the selector (3)   
-  Push  the  green  button  (4)  for  linking  the  remote  control  to  platform; 

a  long 

sound confirms the link of remote control with the machine. 

 

 

 If the remote control is active and linked to platform, the below led blinks slowly and green: 

 

 

 

If the led blinks quickly and green, it means that the remote control is active but not linked to platform. 
If led blinks quickly and alternatively green/red, it means that the level of remote control battery is low or a 
joystick or switch is in error. 
 
If the aerial platform has a Honda iGX390 engine or HATZ 1B40 Diesel engine as optional, it is enough turn 
the  engine  ignition  key  on  position  1  (see  picture)  and  start  the  engine  by  the  specific  switch  on  remote 
control 

 

HONDA iGX390   

HATZ 1B40 Diesel (optional) 

 

 

 

 

CARING FOR THE ENVIRONMENT 

We recommend that you take the engine speed to the maximum only if necessary; in general, it 

is sufficient to maintain an average engine speed.

 

 

Содержание SA18

















Отзывы: