background image

QUICK USE MANUAL                                                                                                                                                             68090258 

ORIGINALE 

RUTHMANN ITALIA s.r.l.  Via Santa Maria del Piano di Sotto, 91/B - 47854 Montescudo – Monte Colombo (RN) – ITALIA   

pagina 3 

 

 Start combustion engine  Stop combustion engine 

 

 
The orange led on chassis is on when the control of lower part of platform is activated and there are the 
following conditions for controlling the outriggers: 
- boom in rest position, 
- the crawler/outriggers functions are active on remote control, 
-  there  isn’t  any  malfunctioning  of  platform  that  could  block  all outrigger  functions  (..  as  breakdown of  a 
microswitch on stabilzer). In case of a malfunctioning the led is off and an alarm message appears on the 
display of remote control. If the malfunctioning causes the block of only a part of lifting movements, the 
white led continues to be on. If led is off and there isn’t any alarm message on display, the operator has to 
check the previous conditions. 

 

 

The 

ORANGE  LED  is  ON

  when  the  control  of  lower  part  of  platform  is 

activated  and  there  are  the  following  conditions  for  controlling  the 
outriggers: 
- boom in rest position, 
- the crawler/outriggers functions are active on remote control, 
- there isn’t any malfunctioning of platform that could block all outirgger 
functions  (..  as  breakdown  of  a  microswitch  on  stabilzer).  In  case  of  a 
malfunctioning the led is off and a alarm message appears on the display  
of remote control. If the malfunctioning causes the block of only a part of 
lifting movements, the white led continues to be on. If led is off and there 
isn’t  any  alarm  message  on  display,  the  operators  has  to  check  the 
previous conditions. 
 

 

 

MOVING the MEWP (TRANSLATION) 

 

 

 

Operate  the  two  levers  from  the  remote  control  backwards  and  forwards  simultaneously  to  obtain 
translation movement in one direction or the other; by operating the levers individually, the machine may 
be steered – this steering may be accentuated by carrying out a counter-rotation of the other track. 
The handles on remote control contains a safety touch sensor. Only if the operator has the remote control 
in his hands, the touch sensors activate the crawler driving function and the green led “Crawler Activate” is 
on: 

 

 

 

Содержание SA18

















Отзывы: