QUICK USE MANUAL 68090258
ORIGINALE
RUTHMANN ITALIA s.r.l. Via Santa Maria del Piano di Sotto, 91/B - 47854 Montescudo – Monte Colombo (RN) – ITALIA
pagina 10
3.
lift the main boom for having approximately an angle of 2°
4.
Turn the Basket leveling Key selector placed on remote control and simultaneously move up or down
the basket joystick (red) until you have corrected the level of the basket
!!! DURING THIS PROCEDURE THE MOVEMENT IS VERY SLOW!!!
!
ATTENTION: CARRY OUT THE CORRECTION OF THE BASKET LEVELLING WITH CARE AND
WITHOUT PEOPLE AND MATERIAL IN THE BASKET.
!
ATTENTION: IT IS OBLIGATORY TO LEVEL THE BASKET BEFORE TO USE THE PLATFORM.
!
ATTENTION: NOT MOVE ANY BOOMS IF THE BASKET IS NOT WELL LEVELLED; THIS COULD
CAUSE DAMEGES ON LEVELLING CYLINDERS.
2. OPERATION WITH ELECTRIC MOTOR
Before using the machine with the electric motor do the following:
1)
Check that the required voltage and frequency are correct (220V – 50Hz) (optional 110V);
2)
Check that the power supply cable is in good condition;
3)
If you use an extension cord, ensure that it is suitable, in good condition and that its cross-section is
greater than that of the power supply cord to prevent it from overheating;
4)
Place an earthing device into the ground and connect it to the frame of the machine or connect the
machine to a suitable earth network if you are working inside buildings.
To connect to the mains use a three-way cable with a cross-section of 3*1.5mm² that is not greater than
10m in length. For a cable with a cross-section of 3*2.5mm² you can use a 20m cable.
Procedure:
1- Fit the plug into the socket (1)
1
1
