10
If the TC device sends off
an alarm message via the
telephone line, it will first an-
nounce the own phone
number. The own phone
number (max. 24 digits) will
be programmed in the menu
settings (”3”).
Own Phone Number
If a contact is activated, the
programmed alarm phone
number will automatically be
called. A telephone connect-
ed at the terminals a2/b2 will
be switched off during the
alarm by a relay of the TC
device. Alarms occuring dur-
ing a remote switching ses-
sion (the TC device has the
telephone line already in
use), will be processed after
releasing the telephone line.
Each of the three up to 24-
digits phone numbers can
be programmed in the menu
settings under input 1/2. At
the same position the ap-
propriate input can be acti-
vated (”4”).
Alarm Phone Numbers
and De-/Activating Inputs
If a confirmation does not
take place, alarm messages
will be announced at the
programmed alarm phone
number up until the pro-
grammed number of dial at-
tempts has been reached.
There is a two minute break
between the dial attempts,
independent from whether or
not the called party has an-
swered the call.
Operation
