Call the TC device and dial
the code number.
”Please dial a device
number.”
input state
10 switch off device
11 switch on device
16 impulse mode (1 s)
1# state request
”Impulse mode. The
device 1 is turned
off/on.”
State Request
Operation
After calling and seizure of
the telephone line, the lan-
guage selection (at the first
call) as well as correct entry
of the code number the
state of the connected de-
vice can be checked via the
telephone with DTMF (#),
switch the device on or off
(0, 1, 6) or modify the indi-
vidual settings of the TC de-
vice (9) – like alarm phone
numbers, own phone num-
ber, answering machine
mode, ringing signals, code
number, number of dial at-
tempts or language.
The automatic call accept-
ance will be activated with
the push-button
. The as-
signed LED
lights up.
The device seizes the tele-
phone line after reception of
the programmed number of
ringing signals (see page 11
and 18). With the S1 push-
button the device connected
to the output can be
switched on or off. The as-
signed LED S1 indicates the
switching state (LED lit =
on).
The LED
starts blinking
after receiving the first ring-
ing signal.
Function
8
